Top #10 Bluetooth Le Arduino Shield With Buying Guide

By /
Last Update:

Are you looking for Bluetooth Le Arduino Shield Reviews? Our experts found 51420 number of feedback online for "Bluetooth Le Arduino Shield" and shortlisted them. This suggestions is created for those looking for their ideal Bluetooth Le Arduino Shield. On selected products for the Bluetooth Le Arduino Shield you will see ratings. The rating matrix we have generated is based on user ratings found online. Take a look -

Bluetooth Le Arduino Shield

What makes the Bluetooth Le Arduino Shield so good?


We found 51420 reviews when researching. We have considered users feedback on the Bluetooth Le Arduino Shield and our suggestions includes only the finest of them in this article.

NoProductScoreAction
1DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano9.8Buy Now
2HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino9.8Buy Now
3HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface9.4Buy Now
4Gikfun Bluetooth XBee Shield V03 Module Wireless Control for ZigBee Arduino (Pack of 2pcs) EK1185x29.2Buy Now
5GAR Colossus Starter Kit for Arduino Uno Mega Nano Complete Advanced Set8.8Buy Now
6Adafruit Bluefruit LE Shield - Bluetooth LE for Arduino8.6Buy Now
7EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDE8.4Buy Now
8Songhe HC05 HC 05 Bluetooth Module RF Wireless Bluetooth Transceiver Module 6 Pins for Arduino (2PCS)8.2Buy Now
9HiLetgo UNO R3 D1 R32 ESP32 ESP-32 CH340G WiFi+Bluetooth+UNO Development Board WiFi Bluetooth 4MB Flash with Micro USB for Arduino8.2Buy Now
10DAOKI L298P Motor Driver Module High-Power L298P PWM Speed Controller H-Bridge Driver Shield Expansion Board DC Stepper Motor Controller Bluetooth Interface for Arduino8.2Buy Now

Table Of Content:

1. DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano

DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 NanoBuy Now
  • Low Energy: With HM-10 bluetooth 4.
  • DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX.
  • Led status indication: when the connection is established will always light, disconnection is flash
  • iBeacon Support:You can make this module into ibeacon mode.
  • working voltage 3.

2. HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for ArduinoBuy Now
  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle.
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid.
  • Small size, low power consumption,high sensitivity for send and receive.
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect.
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage.

3. HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication Interface

HiLetgo MEGA2560 ATmega2560-16AU Sensor Shield Sensor Expansion Board V2.0 with Bluetooth SD Card APC220 Wireless RF Ultrasonic Sensor Communication InterfaceBuy Now
  • This MEGA Sensor Shield V2.
  • Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.
  • For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor.
  • A sensor requires only a general 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, the preparation of the corresponding program downloaded to MEGA controller reads the sensor data, or receive wireless module back pass data through the arithmetic processing, the final easy to complete your own interactive works.
  • Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers.

4. Gikfun Bluetooth XBee Shield V03 Module Wireless Control for ZigBee Arduino (Pack of 2pcs) EK1185x2

Gikfun Bluetooth XBee Shield V03 Module Wireless Control for ZigBee Arduino (Pack of 2pcs) EK1185x2Buy Now
  • Bee Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.
  • It can be used for programming or communicating with board which basic Arduino but without USB interface.
  • Easily connected to a PC via mini USB cable.
  • It is a fully Assembled shield without the XBee module

5. GAR Colossus Starter Kit for Arduino Uno Mega Nano Complete Advanced Set

GAR Colossus Starter Kit for Arduino Uno Mega Nano Complete Advanced Set, 5 Main Boards - 30 Sensors, 10 Shields w/ ESP32 WiFi + Bluetooth Modules for Wireless Robotics Smart CarBuy Now
  • Adv

    ancing development of robotics technology w/ Earths Biggest Colossal Giant of Giants Super Most Advanced Starter Kit for Arduino.

  • Build advanced wireless and IoT projects with the ESP8266 WiFi Transceiver, HC-05 Bluetooth module, 2x NRF24L01 Long and short range transceiver and also the 433Mhz wireless modules and the ESP32 dual WiFi + Bluetooth for latest wireless technology in Arduino.
  • 10 shields including the Mega Protoshield, CNC Shield, LCD Shield, Sensor Shield, Game Pad & SD Card shield and W5100 Ethernet Shield with added accessories like OV7670 camera, 2x Nema17 stepper motors, multiple LCDs, 30 sensors + Robot Car Chassis and motor to build your ultimate Arduino super robot experimental vehicle.
  • Free access to the GAR Dropbox Cloud + 16G USB flash drive which includes PDF guide files & tutorial and video links to help you learn programming all the components and get started quickly.
  • Effective technical/customer support from USA with free lifetime replacement guarantee on all parts – Equip your robotics and engineering labs and classrooms for the future.

6. Adafruit Bluefruit LE Shield – Bluetooth LE for Arduino

Adafruit Bluefruit LE Shield - Bluetooth LE for ArduinoBuy Now
  • The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID)
  • Can become a BLE Heart Rate Monitor (a standard profile for BLE) – you just need to add the pulse-detection circuitry.
  • Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons.
  • Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware.

7. EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDE

EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDEBuy Now
  • EEEEE UNO R3 uses ATMEL ATMEGA328P ( Same IC as the Arduino UNO R3)  with A16U2 faster transfer rates.
  • 100% compatible with the Arduino IDE,
  • Multi-Function Shield for rapid prototyping and integrated solution
  • 7 segment digit display X 4, Buzzer, LED X 4, switch X 3, adjustable potentiometer, reset button, Servo connector X 4, External sensor connector.
  • 50cm USB cable and 4 Extension headers for better electrical connection

8. Songhe HC05 HC 05 Bluetooth Module RF Wireless Bluetooth Transceiver Module 6 Pins for Arduino (2PCS)

Songhe HC05 HC 05 Bluetooth Module RF Wireless Bluetooth Transceiver Module 6 Pins for Arduino (2PCS)Buy Now
  • Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards
  • Working current: matching for 30 MA, matching the communication for 8 MA.
  • Potter default rate of 9600, the user can be set up.
  • Dormancy current: no dormancy.
  • Used for GPS navigation system, water and electricity gas meter reading system.
  • With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment

9. HiLetgo UNO R3 D1 R32 ESP32 ESP-32 CH340G WiFi+Bluetooth+UNO Development Board WiFi Bluetooth 4MB Flash with Micro USB for Arduino

HiLetgo UNO R3 D1 R32 ESP32 ESP-32 CH340G WiFi+Bluetooth+UNO Development Board WiFi Bluetooth 4MB Flash with Micro USB for ArduinoBuy Now
  • DC 5V-12V
  • 1 analog input(3.2V max input)
  • Micro USB connection
  • Compatible with For Arduino
  • D1 R32=WiFi+Bluetooth+UNO

10. DAOKI L298P Motor Driver Module High-Power L298P PWM Speed Controller H-Bridge Driver Shield Expansion Board DC Stepper Motor Controller Bluetooth Interface for Arduino

DAOKI L298P Motor Driver Module High-Power L298P PWM Speed Controller H-Bridge Driver Shield Expansion Board DC Stepper Motor Controller Bluetooth Interface for ArduinoBuy Now
  • L298P Chip】Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
  • High-speed Schottky diodes】Use eight high-speed Schottky diodes at motor output as protection.
  • Stack design】 can be directly plugged into the Arduino, easier to use.
  • Performance】The L298P shield DC motor driver has PWM speed control mode; Dual high-power H-bridge driver.
  • Input】Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.

Bluetooth Le Arduino Shield Buying Guide


Does the thought of finding a great Bluetooth Le Arduino Shield stress you out? Has your mind been juggling between choices when it comes to buying Bluetooth Le Arduino Shield in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Bluetooth Le Arduino Shield for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Bluetooth Le Arduino Shield Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Bluetooth Le Arduino Shield in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Bluetooth Le Arduino Shield currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Bluetooth Le Arduino Shield brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Bluetooth Le Arduino Shield based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Bluetooth Le Arduino Shield before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Bluetooth Le Arduino Shield they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Bluetooth Le Arduino Shield, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Bluetooth Le Arduino Shield before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Bluetooth Le Arduino Shield will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Bluetooth Le Arduino Shield if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Bluetooth Le Arduino Shield on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Bluetooth Le Arduino Shield on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Bluetooth Le Arduino Shield featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.
Scroll to Top